| Used and One of a
Kind Items, page 1 |
|
|
|
|
 |
|
2" focuser above is brand
new. I bought this and it got back-ordered and by the
time it arrived I had found another solution. Lower ring
unscrews and it takes either the 1.25" top shown on it or
the 2" ring shown next to it. All metal except focuser
knobs.
|
$35
includes US shipping
|
|
|
| 1.25" focuser above is gently
used. R&P focuser has a helical section built in
to help with fine focusing adjustment. It was replaced
on an 8" OTA with a 2" and so it is now surplus. Works
well. All metal except focuser knobs. |
$25 includes US
shipping.
|
|
|
Finder and mount #1
This is a cheap finder & mount. It is all
plastic, and has crosshairs. Objective is 24mm.
$8 includes US shipping.
|
|
Plastic finder mount #1.
(right) This has bracket internal to the OTA to hold
it firmly in place. I believe this came off of a Meade
4.5" reflector.
$9 includes US shipping. |
 |
|
|
Small finder holder 6 hole
complete with screws. Finder clearance is 35mm in
diameter.
All metal, two holes in base for OTA mounting, none of these
screws included (as shown)
$13 includes US shipping.
|
|
Even smaller 6 hole finder
but no screws available. All metal with 2 OTA mounting
holes. Finder clearance is 26 mm. $8 includes US
shipping.
|
|
|
|
A single mounting ring. If you
have one, you can make it a pair. It has 1 screw
for the ring and two for mounting to an OTA. The
mounting ring is 94 mm in diameter. $15 includes
US shipping
|
|